RN Grease
RN Grease
- During running in, the machine is operated within a shortest possible time under full load condition without risking the drive and thus it would give positive influence on service life of the open gears.
- Care should be taken to see that the load to be transmitted should be increased step by step by checking condition of tooth flank at regular intervals.
- Shortening the running in period by radical means will increase the danger of gear damage by removal of the gear material particles.
- Unlike priming process, the grease is applied though the automatic grease spraying system set at maximum output.
- Special attention to be paid when changing from one load step to next one.
- In case of abnormal flank damage reduce the load. During the running in process, it is perceived to achieve optimum surface finish on gear flanks which will enable them to transmit max power with minimum contact pressure imparted to the lubricating film.
Packing Available:
Technical Data
| PARAMETERS | SPECIFICATIONS |
|---|---|
| Appearance | Smooth and Homogeneous |
| NLGI Grade | 00 |
| Base Oil Type | Mineral |
| Base Oil Viscosity | 500 cSt |
| Thickener Type | Al-Complex |
| EP Properties | High EP |
| Operating Temperature | -10 to 200°C |
Need Reliable Lubrication Solutions?
Let’s keep your machines running at their best.