These timepieces are
replica louis vuitton bogus beneath the administration of accomplished Swiss horologists. Superior actual such as
replica handbags 18k solid gold, 904L stainless animate and scratch-proof azure clear are
replica watches acclimated in the accomplishment of Swiss Replica Watches. Doesn`t amount you accept
louis vuitton replica appropriate a dress, adventurous dress, affluence or
replica watches uk a affairs watch; you will accomplish your desires affordably with
gucci replica Swiss Replica Watches. In the accumulating the
breitling replica affected watches including Rolex, Cartier, Hublot, Breitling, Panerai and
omega replica Audemars Piguet are a lot of admired a part of
breitling replicahumans in these days.Humans adulation to accumulate a accumulating of altered accessories and accoutrement for one appearance alertness similarly. So you can allow a acceptable accumulating of abundant watches with Swiss Replica Watches in this regards.
 |
 |
 |
|
|
|
|
|
 |
|
CUTSOL-S (WATER-MIX SOLUBLE CUTTING OIL)
|
DESCRIPTION
RELIABLE CUTSOL-S is soluble type superior grade cutting oil, which form a milky emulsion with water. It is manufactured from specially selected base oil having excellent solubility. The emulsion formed is homogenous and stable is nature, and does not split during use or routine machine shut down periods.
RELIABLE CUTSOL-S contains special rust inhibitors, which imparts, anti-rust and anti-corrosive properties to the emulsion. Carefully selected biocide (Triazine) is added to prevent bacterial growth in emulsion.
APPLICATIONS
RELIABLE CUTSOL-S is recommended for variety of metal working operations on ferrous and non-ferrous metals such as cutting, cold rolling of steel, and hot rolling of aluminium, special rolling of stainless steel etc. The most common emulsion strength use for machining range from 5 - 10 % depending on the severity of machining. More dilute emulsion are recommended. For stable emulsion, oil should always be added to water and not vice-versa, with continuous stirring.
|
|
RELIABLE CUTSOL-S meets the requirements as specified by IS: 1115-1986 (Re-affirmed in 1996) and ZX-1 defence standard.
BENEFITS
• Has superior cooling and lubricating properties,
• Contribute towards clean work, good visibility of operating zone.
• Excellent surface finish and minimum tool wear.
• Provides long lasting stable emulsion due to critically selected biocide. NO MONDAY MORNING SMELL PROBLEM
• Protect work-piece, machine components, and tool materials from rust and corrosion.
• Enables to obtain superior finish and accurate tolerances to the parts machined.
PREVENTIVE MEASURES
The under mentioned preventive measures are helpful for control of offensive odour.
• Pre-treatment of water used in preparing emulsion
• Avoiding oil blanket on the surface of emulsion in the sump.
• Aeration of emulsion.
• Frequent removal of chips and fines from the sump.
• Periodic cleaning of the coolant reservoir and system. |
|
|
| TYPICAL CHARACTERISTICS |
S.NO. |
PROPERTIES |
CUTSOL-S |
1. |
Appearance |
Visual |
Transparent, light brown Fluid |
2. |
Kin. Vis., cST. @ 40 °C |
D-445 |
34 |
3. |
Flash Point, COC °C Min. |
D-92 |
150 |
4. |
Pour Point. °C Max. |
|
0 |
5. |
Thermal Stability Test |
IS- 1 448, P: 99 |
|
|
PERFORMANCE TEST ON 5% EMULSION: |
6. |
Cast Iron Corrosion Test |
IP-273 |
0/0-1 (Pass) |
7. |
Frothing Test in 200 ppni water |
IS- 1 448, P: 99 |
No froth after 15 min. (Pass) |
8. |
pH of 5% sol. in distt. Water |
pH meter |
9.2 |
9. |
Emulsion Test in 400 ppm water |
IS- 1448 |
Pass |
10. |
Copper Corrosion Test |
D-130 |
la (Pass) |
|
|
These are typical figures and do not constitute a specification
|
|
|
|
|
|
|
| RELIABLE © 2008. All Rights Reserved |
Phone: +91-130-2374014, 2374015 | |
E-mail: reliablelubeoils@rediffmail.com |
|
|
|
|
