NEAT CUTTING OILS
These products are a blend of refined Mineral oils and additives. Sulfur and Chlorine are incorporated to impart extreme pressure (EP) properties. High quality fatty oils are added to provide improved lubrication under boundary conditions and also to impart wetting characteristics.
Neat cutting oil are used as supplied without any dilution, to obtain optimum performance. The products are applied copiously to flood the work-tool-chip area thoroughly to derive maximum benefits of cooling vitally needed to increase tool life and production.

NEAT CUTTING
Series can be classified under three main categories.
• High Oiliness type.
• EP Oils Non-staining type.
• EP Oils staining type.

NEAT CUTTING OILS (OILINESS TYPE) NEAT CUT-14
It is light coloured low viscosity oil recommended for use in machining all non-ferrous metals except Titanium. This product has good heat transfer properties to cool effectively under high-speed conditions. It is ideally suited for Honing Operations.

NEAT CUT-15
It is a very light coloured oil with low viscosity and is useful for machining all non-ferrous metals (except titanium) where a low viscosity oil of non-staining behaviour is required. It has good heat transfer properties and therefore effectively cools the tool and work piece; under high speed conditions at which metals like aluminium, magnesium, zinc and their alloys are machined. NEAT CUT-15 is particularly suitable as a Honing oil.

NEAT CUT-16 and 18
These products have higher viscosity then NEAT CUT-15. They have superior metal wettability and provide better cooling in condition of increased operational severity.

NEAT CUT-18 is most heavily compounded oil. It is, therefore, useful for machining the many more difficult-to-machine non-ferrous metals. It is particularly acceptable for drawing of non-ferrous rods and tubing.

NEAT CUT-1 Smeets IS: 3065-1985 Type I, Grade II specification (Re-affirmed in 1990)