THERMIC FLUID 500 RELIABLE Thermic fluid 500 is a Thermic Fluid designed to cover a broad range of heat transfer applications. The product is manufactured using special refining techniques and is recommended in service involving a maximum bulk temperature of 285 °C.
The product is characterized by the following.
• Excellent oxidation & chemical stability.
• Good heat transfer properties.
• Low Volatility, Low Vapour Pressure, Non-corrosive & non-toxic.
• It is used for most conventional operations and finds extensive application in the textile, pharmaceutical, chemical and processing industries.
THERMIC FLUID 600 RELIABLE Thermic fluid 600 is a premium quality Heat Transfer Oil specifically developed for
heat transfer system where bulk operating temperatures go upto 305°C. This product is derived from finest quality petroleum base stocks and is fortified with high performance additives to enhance performance at higher temperatures.
The salient features of THETMIC FLUID 600 are:
• Ability to withstand higher operating temperatures, upto 305°C.
• Reduced oxidation and thermal degradation, hence longer life.
• Minimal fouling and deposit formation on heat transfer surface, hence it offers improved heat transfer.
NOT IMAGE AVAILABLE
THERMIC FLUID 600 RELIABLE Thermic fluid 600 gives excellent performance in high temperature Heat Transfer
Systems. It can even replace imported synthetic products with a few minor system modifications and operate satisfactorily subject to the above temperature limit. It is an excellent heat transfer fluid & finds a wide range of applications in textile, pharmaceutical, chemical & processing industries.
TYPICAL CHARACTERISTICS
S.No.
PROPERTIES
THETMIC FLUID
500
600
1.
Kinematics Viscosity, cSt @ 40 ° C
27-35
27-38
2.
Flash Point COC, °C, Min.
194
194
3.
Pour Point, °C, Max.
0
0
4.
Copper Strip corrosion 3 hr. @ 100° C (ASTM), Max.
1
1
5.
. Number mg KOH/gm, Max
0.15
0.15
Specific Heat Kcal/Kg °C at: -
1.
260 °C
0.730
0.740
2.
280 °C
0.751
0.760
3.
300 °C
0.772
0.790
Thermal Conductivity, Kcal/hr-mt °C at: -
1.
260 °C
0.097
0.100
2.
280 °C
0.096
0.099
3.
300 °C
0.095
0.097
These are typical figures and do not constitute a specification
